Cisco 8861 Wifi phone set up

Connect to a Wireless Network

Do not try to join a TSTC Network. This will mean we'll have to reset the phone when you get it home to set up.

1. Plug in the power adapter.
2. Press Information and settings (gear icon).
3. Navigate to Network Configuration.
4. Select Wi-Fi configuration.
5. Select the Service Set Identifier (SSID) of the network.
6. Enter the network Passphrase/password.
7. Press Connect.
8. A message that connection was successful will appear.
9. Press OK to return to the Network configuration menu.
10. Enter tstc.edu for the service domain on the Welcome screen and press Continue
11. Enter your OneID username and Password
12. Press submit

Resetting the phone

1. Remove power from the phone in one of these ways:
   1. Unplug the power adapter.
   2. Unplug the LAN cable.
2. Wait for 5 seconds
3. Press and hold # and plug the phone back in. Release the # only when the Headset and Speaker buttons are lit.
   NOTE: In some hardware versions, the Mute button also lights along with Headset and Speaker buttons when you plug the phone back in. In that case, wait for all of them to go out and release # only when the Headset and Speaker buttons are lit again
4. Enter the following key sequence: 123456789*0#
5. The light for the Headset button turns off after you press the 1 key. After you enter the key sequence, the Mute button lights.
   WARNING: Do not power down the phone until it completes the factory reset process, and the main screen appears.
6. The phone resets.